Swipe to change view · pinch to zoom
Pinealon 10 mg lyophilized research peptide vial, PRIMEGEN LABS front label. Buy Pinealon 10 mg from PrimeGen Labs — 99.2% purity lyophilized Pinealon peptide for laboratory research, third party tested by HPLC and mass spectrometry, supplied in a sealed 10 mL borosilicate vial with a batch-matched certificate of analysis.
Neuroprotective tripeptide
Short bioregulator peptide referenced in neuronal oxidative-stress models.
In stock
Select strength
Quantity
Price
$34.00Shipping costs are calculated at checkout. Full shipping information · Refund & damage policy
Pinealon 10 mg is a lyophilized research peptide supplied by PrimeGen Co. (vial branded PRIMEGEN LABS) for laboratory research use only. Short bioregulator peptide referenced in neuronal oxidative-stress models. Each lot is RP-HPLC assayed at 99.2% purity with a lot-matched certificate of analysis available digitally. It is not a drug, supplement, or cosmetic and is not for human or veterinary use.
Pinealon is catalogued under Research Peptides and Longevity & Cellular Research. Each lot ships with third-party certificate of analysis documentation, is released against our quality control process, and is dispatched from southern Virginia — see shipping information and the FAQ before ordering.
For laboratory research use only. Not for human or veterinary consumption.
Long-term
-20 °C, sealed, desiccated
In transit
Ambient stable up to 21 days
After reconstitution
2–8 °C, use within 21 days
Light exposure
Protect from direct light
Lot XX · HPLC + MS report issued by an independent laboratory. The released PDF is available on request.
Research summary: Short bioregulator peptide referenced in neuronal oxidative-stress models.
Pinealon is a synthetic tripeptide bioregulator from the same Russian research programme that produced Epitalon, developed as a short peptide with reported affinity for neuronal chromatin.
Described in the literature as penetrating the nuclear compartment of neuronal cells and interacting with regulatory DNA sequences, modulating expression of antioxidant and anti-apoptotic genes under hypoxic stress in culture models.
Listed fields describe where this sequence appears in published in vitro and preclinical literature. They are not indications, applications, or claims of effect.
Allow the vial to reach room temperature before opening to prevent condensation on the lyophilized cake. Add sterile or bacteriostatic water slowly down the inner wall of the vial, then let the powder dissolve without agitation; swirl gently if needed. Do not shake or vortex — shear forces denature peptide secondary structure and cause foaming that traps material on the stopper.
As a sealed lyophilized powder the material is stable for extended periods at -20 °C when kept desiccated and protected from light. Once in solution, stability shortens considerably: aqueous stocks are normally held at 2-8 °C for short term work or aliquoted and frozen for longer storage. Repeated freeze-thaw cycling is the most common cause of measurable potency loss.
Single sequence per vial, sealed under inert gas in USP Type I borosilicate glass with a butyl rubber stopper and crimped aluminium overseal. Each vial carries a printed PrimeGen label with product name, strength, lot number, manufacture and retest dates, storage temperature and a QR code linking to the lot record. Vials ship in a rigid foam insert inside a protective mailer at ambient temperature.
For laboratory research purposes only. Not intended for human or veterinary use. Not intended to diagnose, treat, cure, or prevent any disease. Purchasers are responsible for complying with all applicable laws and regulations.
Pinealon is a tripeptide — glutamate, aspartate, arginine — from the same family of short regulatory sequences as epitalon, and it is studied largely in neuronal culture models examining oxidative stress and cell survival. Three residues is close to the practical floor for a peptide, and everything about its behaviour follows from that: high aqueous solubility, rapid proteolysis in serum, and a molecular weight low enough that mass-spectrometric identification is trivially clean.
The design consequence is exposure. With a short half-life in complete medium, single-addition experiments produce a declining concentration profile rather than a steady one, so published protocols frequently re-dose or use reduced-serum conditions during the exposure window. Reporting which of these was used is essential when comparing results between laboratories, because the effective exposure differs by more than the nominal concentration suggests.
Both fill weights of this compound are released against the same specification and documented per lot.
This page documents one specific presentation: a sealed vial filled to a nominal 10 mg of lyophilized Pinealon, released at 99.2% chromatographic purity by reverse-phase HPLC and confirmed for identity by an independent laboratory. Each fill weight is catalogued separately because each has its own lot history and its own certificate of analysis — the analytical summary shown here belongs to this presentation rather than to the compound in general.
At $34.00 per vial the 10 mg presentation works out at roughly $3.40 per nominal milligram of peptide before any volume discount. That figure is the only fair basis for comparing this listing with another supplier's, since vial price alone says nothing about how much material is inside. Note that it is calculated on nominal fill weight; net peptide content on the lot certificate is lower, because lyophilized peptide also carries counter-ion and residual moisture.
Pinealon is also catalogued as 15 mg. Choosing between them is a planning decision rather than a pricing one: the controlling factor is how much material a study can consume once a vial is opened and reconstituted, because a sealed dry vial is stable for a long period while a working solution is not. Buying a larger fill to lower the unit cost and then discarding half of it after repeated freeze-thaw cycling introduces exactly the variability the experiment is trying to avoid.
This dossier collects everything a laboratory typically needs before requisitioning Pinealon at the 10 mg presentation: how the sequence is characterised in published literature, how the material is assayed and released, how it should be stored and reconstituted, and where it sits inside the wider longevity & cellular research catalogue. Every unit is supplied as a sealed lyophilized powder at 99.2% and is sold exclusively for laboratory research use. It is not a drug, dietary supplement or cosmetic, and it is not intended for human or veterinary use.
Pinealon is a synthetic tripeptide bioregulator from the same Russian research programme that produced Epitalon, developed as a short peptide with reported affinity for neuronal chromatin.
Short bioregulator peptide referenced in neuronal oxidative-stress models. Investigators most often encounter this sequence in neuronal culture stress-response models and in peptide-dna interaction studies, which is why the 10 mg vial is the format we release most frequently — it gives enough material for a full dose-response series at typical assay concentrations without leaving a large reconstituted surplus to store. This compound is catalogued at 2 strengths (10 mg, 15 mg), so a study can be scaled without changing lot chemistry.
Described in the literature as penetrating the nuclear compartment of neuronal cells and interacting with regulatory DNA sequences, modulating expression of antioxidant and anti-apoptotic genes under hypoxic stress in culture models.
Descriptions above summarise observations reported in peer reviewed in vitro and animal literature. They describe what has been measured in model systems and are not claims of effect, indications, or guidance for use in humans or animals. Laboratories designing new work should return to the primary literature for concentration ranges, vehicle selection and control design, because reported effects in this class are strongly assay dependent.
Published work involving Pinealon clusters into a small number of recurring experimental settings:
Because these are in vitro and preclinical contexts, the practical requirement on the material itself is consistency: a known mass of a single sequence, a stated purity, and a lot record that can be cited in a methods section. That is what the 10 mg vial and its accompanying certificate of analysis are designed to provide.
Each Pinealon lot is assayed in house by reverse-phase HPLC and then re-tested by an independent analytical laboratory using HPLC alongside mass spectrometry for identity confirmation. The HPLC trace establishes the chromatographic purity figure printed on the label — 99.2% for the current release — while the mass spectrometry step confirms that the observed molecular ion matches the expected mass for the sequence rather than a truncated or deletion analogue.
Certificates are issued digitally rather than enclosed in the shipment, which keeps the document versioned and retrievable long after the vial is consumed. You can view or request the current report from the certificates library, and the underlying chromatograms and spectra can be requested through laboratory support. Our full release criteria are documented on the quality control and laboratory standards pages.
Storage. Sealed 10 mg vials are held desiccated and protected from light. Short holding periods at 2-8 °C are routine; for longer storage the lyophilized cake is kept at -20 °C. Allow the vial to equilibrate to room temperature before breaking the seal so that atmospheric moisture does not condense onto the powder.
Reconstitution. Allow the vial to reach room temperature before opening to prevent condensation on the lyophilized cake. Add sterile or bacteriostatic water slowly down the inner wall of the vial, then let the powder dissolve without agitation; swirl gently if needed. Do not shake or vortex — shear forces denature peptide secondary structure and cause foaming that traps material on the stopper.
Stability. As a sealed lyophilized powder the material is stable for extended periods at -20 °C when kept desiccated and protected from light. Once in solution, stability shortens considerably: aqueous stocks are normally held at 2-8 °C for short term work or aliquoted and frozen for longer storage. Repeated freeze-thaw cycling is the most common cause of measurable potency loss.
Handling. Work with the reconstituted solution under standard laboratory containment, record the reconstitution volume and date against the lot, and label aliquots with the resulting concentration. Volumes and concentrations are set by your own protocol; nothing on this page is a dosing instruction.
The most common source of irreproducibility with lyophilized peptides is not the sequence itself but the arithmetic around it. A 10 mg vial contains a nominal peptide mass; the actual peptide content of any lyophilized cake also reflects counter-ion and residual moisture content, so laboratories reporting exact molar concentrations should either use the net peptide content figure from the lot certificate or determine content independently by amino acid analysis or quantitative UV. Using the published average mass of 418.4 g/mol, a full 10 mg vial reconstituted in 1 mL of diluent gives a convenient round stock concentration for serial dilution.
Three practical points recur in method sections for this class of material:
Where a study spans several weeks, aliquoting the reconstituted stock immediately and freezing single-use volumes avoids the freeze-thaw cycling that accounts for most of the potency drift observed in longitudinal work.
Pinealon is released at 10 mg, 15 mg. Larger presentations lower the cost per milligram but commit a laboratory to using or storing more reconstituted material; smaller vials suit pilot work, method development and screening plates where a single stock is consumed quickly. The 10 mg vial listed on this page is priced at $34.00. Whatever presentation you select, the underlying material comes from the same synthesis and release programme, so switching strength does not change the analytical profile.
Orders ship from our facility in Chase City, Virginia, within the United States only, and every shipment carries the research use restriction on the outer documentation. Vials travel at ambient temperature in a rigid insert; lyophilized peptide is stable for the transit window, and the material should be moved to its long term storage temperature on arrival. Research materials are non returnable once dispatched.
Laboratories sourcing Pinealon frequently reference MOTS-c 5 mg, Epitalon 10 mg, NAD+ 500 mg and SS-31 10 mg alongside it, either as comparators in the same assay or as adjacent sequences in the same pathway literature.
This compound is catalogued under Research Peptides, Longevity & Cellular Research. The complete research compound catalogue lists every sequence and strength we hold.
Background reading in the research library: What are research peptides?, Understanding lyophilized powders, Are research peptides legal to buy online?.
Ordering details, transit times and our US shipping guarantee are set out on the shipping policy page, and general purchasing and compliance questions are answered in the frequently asked questions. Terms of sale, including our no returns policy on research materials, are published on the terms page.
Every Pinealon release passes through the same programme: synthesis against a defined sequence, in-house RP-HPLC purity assay, independent third party HPLC and mass spectrometry confirmation, visual inspection of the lyophilized cake, and a documented fill and seal step under inert gas in USP Type I borosilicate glass. Material that fails any stage is not released, and the certificate published for a lot is the certificate generated for that specific synthesis — never a representative or historical document carried over from an earlier batch.
Laboratories evaluating Pinealon for the first time frequently ask for the raw analytical files rather than the summary certificate. Chromatograms, mass spectra and, where applicable, net peptide content data can be requested for any lot; our support team answers analytical questions directly rather than through a ticket queue. Institutional purchasing, repeat supply for multi-month studies and quotations for multiple strengths are handled the same way.
The characterisations summarised above are drawn from peer reviewed in vitro and preclinical publications indexed in PubMed and from the corresponding entries in ChEMBL, PubChem and UniProt. Searching the compound name “Pinealon” in those databases returns the primary sources for the mechanism and application notes on this page. PrimeGen Co. does not publish clinical data and makes no therapeutic claim for this or any other catalogue item.
For laboratory research use only. Not for human or veterinary use. Not a drug, supplement, food or cosmetic. Read our research use policy before ordering.
Each unit contains 10 mg of lyophilized Pinealon in a sealed vial. The lot matched certificate of analysis is available digitally on the Certificates page and is not physically enclosed in the shipment.
Every lot is assayed in house by RP-HPLC and then re-tested by an independent laboratory using HPLC and mass spectrometry. This lot reports 99.2%.
Reconstitution parameters depend on your protocol. Use bacteriostatic or sterile diluent, add slowly against the vial wall, and swirl rather than shake to avoid shearing the peptide.
Yes. Chromatograms and MS spectra for any lot can be requested through the certificates page or by contacting the laboratory support team.
No. Pinealon is supplied strictly as a laboratory research chemical. It is not a drug, dietary supplement, or cosmetic, it is not approved for human or veterinary use, and it must not be administered to humans or animals.
Sealed 10 mg vials are held desiccated, protected from light, and away from repeated temperature swings; 2-8 °C suits short holding periods while -20 °C is used for longer storage of the lyophilized cake. Once reconstituted, the solution is normally kept at 2-8 °C for near-term work or aliquoted into single-use volumes and frozen, since repeated freeze-thaw cycling is the most common cause of measurable potency loss.
Each vial is filled to a nominal 10 mg of lyophilized peptide, with a published average molecular weight of 418.4 g/mol. Because lyophilized peptide also carries counter-ion and residual moisture, laboratories reporting exact molar concentrations should use the net peptide content on the lot certificate or determine content independently.
Every lot is assayed in house by reverse-phase HPLC for chromatographic purity, then re-tested by an independent laboratory using HPLC alongside mass spectrometry to confirm that the observed mass matches the expected sequence rather than a truncated or deletion analogue. The release specification is ≥ 98% by RP-HPLC; this lot reports 99.2%.
No. Orders ship within the United States only, dispatched directly from our facility in Chase City, Virginia. Vials travel at ambient temperature in a rigid protective insert, and the lyophilized powder is stable across the transit window; move the material to its long-term storage temperature on arrival.
No. Research materials are non-returnable once dispatched, because chain-of-custody and storage conditions cannot be verified after a vial leaves the facility. If a shipment arrives damaged or a lot does not match its certificate of analysis, contact laboratory support and we will resolve it directly.
Compare with similar compounds
Pairs well with
Complementary compounds researchers run alongside Pinealon — never competing alternatives.
Complete your order
Laboratory consumables matched to 1 vial in your cart.
Bacteriostatic Water
30 mL
1 × 30 mL — one vial of diluent per 3 peptide vials
Sterile Syringes
10-pack · 1 mL
10-pack covers a standard order
Alcohol Prep Pads
100-pack
Septum decontamination before every draw
Vial Storage Case
25 slots
Keeps lots organised and light-protected
Researchers also viewed
Longevity & Cellular Research
Strength
10 mg
Purity
99.4%
Each hub sequences the guides, quality documentation and bench notes for a single topic, so you can move from this page into a structured reading path rather than a flat index.
Other compounds catalogued alongside Pinealon in Longevity & Cellular Research. All items are supplied for laboratory research use only.
Background reading from the PrimeGen research library covering Pinealon and the analytical practices behind its documentation.
Explore further
Continue from Pinealon into compounds studied alongside it, the kits that include it, the analytical documentation behind this lot, and the library articles covering its category.
Pinealon · 10 mg
In stock